Executive wires are highly consistent from batch to batch and offer very low fume and low spatter levels leading to excellent operator appeal.
Executive 70S-2ER70S-2 A solid carbon steel wire, intended for single-pass welding and some multi-pass applications. Because of added deoxidants, Exocor 70S-2 can be used for welding steels that have a rusty or dirty surface, with the possible sacrifice of weld quality depending on the condition of the surface. Exocor 70S-2 is used extensively to produce high quality, high toughness welds with the GTAW process.
Executive 70S-3 CFER70S-3 EXECUTIVE 70S-3 CF is a high quality, general purpose welding wire widely used for GMAW fabrication of mild steel material.
Executive 70S-6 CCER70S-6 Executive 70S-6 CC is your best choice in S6 wires for consistency, reliability and exceptional value. Executive 70S-6 CC is designed to exceed expectations by maintaining tight-tolerances within the AWS spec and ensuring that every heat/lot comes tested with actual chemistry and mechanicals.
Executive 70S-6 CCXER70S-6 Executive 70S-6 CCX is a premium quality S6 designed for automated applications where elevated levels of consistency and reliability are demanded. Elevated Si and Mn levels allow better wetting-out, flatter beads, and faster travel speeds.
Executive 70S-6 CFER70S-6 Executive 70S-6 CF (Copper Free) is the latest generation of carbon steel wire designed to increase total productivity while reducing your total welding costs. Executive Copper Free wire is specially designed to reduce wear on consumables and produce great clean welds that require minimal clean-up. This is all to help improve arc on time to keep you welding.
Executive 70S-6 CFPER70S-6 Executive 70S-6 CFP (Copper Free Plus) along with the great benefits of Executive Copper Free the Plus comes with actual mechanicals for every heat/lot tested to -50 Celsius to allow you to tackle extreme cold jobs with confidence.
Executive Plus 7018-1E7018-1 This basic electrode offers both very good welding characteristics and high mechanical values.
Executive 71CME71T-1C/1M-9C/9M H8 Executive 71CM is a low fume, all position carbon steel flux cored wire designed to increase total productivity while helping to reduce welding costs.
Executive 70C-6 MCE70C-6M H4 Executive 70C-6 MC is a high-quality and easy to use metal cored wire designed to help improve your productivity. This premium wire is highly consistent with great weldability intended for single or multi-pass welding in a variety of steel weldments and fabrications.
Executive 71T-11E71T1-11 Executive 71T-11 is a self-shielding flux cored wire designed for single and limited multi-pass applications.
Kobelco Familiarc MX-A70C6LFE70C-6M MX-A70C6LF is a 70 ksi class mild steel metal cored wire for flat and horizontal welding with 75-95% Ar - bal CO2 mixed gas.
Kobelco FRONTIARC-711E71T-1C/M H8 Kobelco Frontiarc-711 is a mild steel flux cored wire for all position single pass and multi pass welding with straight CO2 or 5%Ar-25%CO2 mixed shielding gas.
Kobelco Familiarc DW-A55ESRE71T-12MJ Kobelco Familiarc DW-A55ESR is a 70 ksi class rutile flux cored wire suitable for post weld heat treatment (PWHT) without adverse degradation of mechanical properties while retaining acceptable mechanical properties.
Kobelco Familiarc DW-50E71T-1C/M H8 Kobelco DW-50 is a rutile flux cored wire for carbon steel for general use including seismic application.
Executive 70S-6 CCPER70S-6 Executive 70S-6 CCP is your best choice in S6 wires for consistency, reliability and exceptional value. Executive 70S-6 CCP is designed to exceed expectations by maintaining tight-tolerances within the AWS spec and ensuring that every heat/lot comes tested with actual chemistry and mechanicals. Executive 70S-6 CCP comes with actual charpy impact test results for every heat/lot tested at -50°C (-58°F)
Executive 71T-12MJE71T-12MJ H4 Executive 71T-12MJ is an all-position flux-cored wire designed for single or multi-pass applications that demand exceptional weld metal toughness. It maintains excellent impact toughness down to -50°F (-46°C) in the as-welded and typical post weld heat treated (PWHT) condition.
For over twenty-five years Exocor has been a respected name in the industry as a reliable source of filler metals.
Our corporate office is ISO 9001:2015 certified with memberships in AWS, CWA and GAWDA, and approvals on certain products such as CWB, LLOYDS, and EN.