Executive Cobalt based products are produced to exhibit superior mechanical properties to challenge the most aggressive service environments. Clean, consistent welding wires and electrode allow operators to produce the highest quality welds.
Executive Cobalt 1 (MCAW)
The alloy has a higher carbide content (19%) than those made using either Exocor Cobalt 6 or Exocor Cobalt 12 cored wires. The composition is such that primary hypereutectic carbides are found in the microstructure. This characteristic gives the alloy higher wear resistance, accompanied by reductions in the impact and corrosion resistance. The higher hardness also means a greater tendancy to stress crack during cooling. This cracking tendancy may be minimized by closely monitoring preheating, Interpass temperature and post heating techniques. While the CoCr deposits soften somewhat at elevated temperatures, they normally are considered immune to tempering. Used to build up mixer rotors and items that encounter severe abrasion and low impact.
For over twenty years Exocor has been a respected name in the industry as a reliable source of filler metals.
Our corporate office is ISO 9001:2015 certified with memberships in AWS, CWA and GAWDA, and approvals on certain products such as CWB, LLOYDS, and EN.