Name Classification Description Data
Sheet
MSDS
Exocor 80SB2 ER80S-B2 Used to weld 1/2Cr-1/2Mo, 1Cr-1/2Mo, and 1-1/4Cr- 1/2Mo steels for elevated temperatures and corrosive service. They are also used for joining dissimilar combinations of Cr-Mo and carbon steels. All transfer modes of the GMAW process may be used. Careful control of preheat, interpass temperatures, and postheat is essential to avoid cracking. These electrodes are classified after postweld heat treatment. Special care must be used when using them in the as-welded condition due to higher strength levels. Exocor 80SB2  Data Sheet Exocor 80SB2  MSDS
Exocor 80SD2 ER80S-D2 This material contains Mo for increased strength and a high level of deoxidizers (Mn and Si) to control porosity when welding with C02 as the shielding gas. They will give radiographic quality welds with excellent bead appearance in both ordinary and difficult-to-weld carbon and low-alloy steels. They exhibit excellent out-of-position welding characteristics with the short circuiting and pulsed arc processes. The combination of weld soundness and strength makes this product suitable for single and multiple-pass welding of a variety of carbon and low-alloy, higher strength steels in both the as welded and postweld heat-treated conditions. Exocor 80SD2  Data Sheet Exocor 80SD2  MSDS
Exocor 90SB3 ER90S-B3 Used to weld the 2-1/4Cr-1Mo steels used for high-temperature high-pressure piping and pressure vessels. These may also be used for joining combinations of Cr-Mo and carbon steel. All GMAW modes may be used. Careful control of preheat, interpass temperatures, and postweld heat treatment is essential to avoid cracking. These electrodes are classified after postweld heat treatment. Special care must be used when using them in the as-welded condition due to higher strength levels. Exocor 90SB3  Data Sheet Exocor 90SB3  MSDS
Exocor 90SB9 (P91) ER90S-B9 Designed to provide strength, toughness, fatigue life, oxidation resistance and corrosion resistance at elevated temperatures. Exocor 90SB9 (P91)  Data Sheet Exocor 90SB9 (P91)  MSDS
Exocor 90SD2 ER90S-D2 This material contains Mo for increased strength and a high level of deoxidizers (Mn and Si) to control porosity when welding with C02 as the shielding gas. They will give radiographic quality welds with excellent bead appearance in both ordinary and difficult-to-weld carbon and low-alloy steels. They exhibit excellent out-of-position welding characteristics with the short circuiting and pulsed arc processes. The combination of weld soundness and strength makes this product suitable for single and multiple-pass welding of a variety of carbon and low-alloy, higher strength steels in both the as welded and postweld heat-treated conditions. Exocor 90SD2  Data Sheet Exocor 90SD2  MSDS
7000-A1 E81T1-A1 The addition of 0.50% Mo to this filler metal increases the strength of the weld metal, especially at elevated temperatures, and provides some increase in corrosion resistance; however, it may reduce the notch toughness of the weld metal. This type of electrode is commonly used in the fabrication and erection of boilers and pressure vessels. Typical applications include the welding of C-Mo steel base metals, such as ASTM A 161, A 204, and A 302 Gr. A plate and A335-Pl pipe. 7000-A1  Data Sheet 7000-A1  MSDS
81T1B2 E81T1-B2 Designed to produce weld metal for high temperature service and for matching properties of the typical base metals such as ASTM A 335-Pi 1 pipe and ASTM A 387 Gr. 11 plate. Since all Cr-Mo electrodes produce weld metal which will harden in still air, both preheat and postweld heat treatment (PWHT) are required for most applications. 81T1B2  Data Sheet 81T1B2  MSDS
81Ni1 E81T1-Ni1 Formulated for 80ksi class high strength steel and applicable to low temperature service steel. High notch toughness of welds at low temperature down to -40°F even after PWHT. 81Ni1  Data Sheet 81Ni1  MSDS
91B3 E91T1-B3 Designed to produce weld metal for high temperature service and for matching properties of the typical base metals such as ASTM A 335-P22 pipe and ASTM A 387 Gr. 22 plate. Since all Cr-Mo electrodes produce weld metal which will harden in still air, both preheat and postweld heat treatment (PWHT) are required for most applications. 91B3  Data Sheet 91B3  MSDS
Chromo 1 (1 1/4 Cr1/2 Mo) X-Factor E8018-B2 Designed to produce weld metal for high temperature service and for matching the properties of the Cr-Mo base metal A 387 Grade 11. Chromo 1 (1 1/4 Cr1/2 Mo) X-Factor  Data Sheet Chromo 1 (1 1/4 Cr1/2 Mo) X-Factor  MSDS
Chromo 2 (2 1/4 Cr1 Mo) X-Factor E9015-B3 Designed to produce weld metal for high temperature service and for matching the properties of the Cr-Mo base metal A 387 Grade 22 or 22L. Chromo 2 (2 1/4 Cr1 Mo) X-Factor  Data Sheet Chromo 2 (2 1/4 Cr1 Mo) X-Factor  MSDS
7018-Mo E7018-A1 The addition of 0.50% Mo to this filler metal increases the strength of the weld metal, especially at elevated temperatures, and provides some increase in corrosion resistance; however, it may reduce the notch toughness of the weld metal. This type of electrode is commonly used in the fabrication and erection of boilers and pressure vessels. Typical applications include the welding of C-Mo steel base metals, such as ASTM A 161, A 204, and A 302 Gr. A plate and A335-Pl pipe. 7018-Mo  Data Sheet 7018-Mo  MSDS
8018-C1 E8018-C1 Designed to produce weld metal for high temperature service and for matching the properties of the Cr-Mo base metal A 537 Class 1 or 2, and A 203 Grade A or B. 8018-C1  Data Sheet 8018-C1  MSDS
8018-CM E8018-B2 Contain 1.25% Cr and 0.50% Mo as alloy addition. They are used for the welding of such steels as 0.5% Cr - 0.5% Mo, 1% Cr - 0.5% Mo, and 1.25% Cr - 0.5% Mo, which are used principally in power piping and boiler work for the fabrication of plates, pipes, tubes, castings, and forgings. 8018-CM  Data Sheet 8018-CM  MSDS
9018-CM E9018-B3 Principal application is for welding 2.5% Cr - 1% Mo steels commonly found in pressure vessels, heat exchangers, pipings and other related components. 9018-CM  Data Sheet 9018-CM  MSDS
UV 420 TTR Agglomerated fluoride-basic flux mainly for joining and surfacing applications on creep resistant steel qualities. UV 420 TTR  Data Sheet UV 420 TTR  MSDS
UV 420 TTR-C Agglomerated fluoride-basic flux with high basicity and neutral metallurgical behaviour. UV 420 TTR-C  Data Sheet UV 420 TTR-C  MSDS