Products

Executive Cobalt based products are produced to exhibit superior mechanical properties to challenge the most aggressive service environments. Clean, consistent welding wires and electrode allow operators to produce the highest quality welds.

Executive Cobalt 1 (GTAW)

ERCoCR-C The alloy has a higher carbide content (19%) than those made using either Cobalt 6 or Cobalt 12 wires. Learn More

Executive Cobalt 6 (GTAW)

ERCoCr-A Recommended for cases where wear is accompanied by elevated temperatures up to a maximum of 1200°F (650°C) and where corrosion is involved, or both. Learn More

Executive Cobalt 12 (GTAW)

ERCoCr-B Similar in composition to Executive Cobalt 6 deposits except for a slightly higher carbide content (approx. 16%). Learn More

Executive Cobalt 21 (GTAW)

ERCoCr-E Welds have very good strength and ductility at temperatures up to 1600°F (871°C). Learn More

Executive Cobalt 1 (MCAW)

ERCCoCR-C The alloy has a higher carbide content (19%) than those made using either Exocor Cobalt 6 or Exocor Cobalt 12 cored wires. Learn More

Executive Cobalt 6 (MCAW)

ERCCoCr-A Recommended for cases where wear is accompanied by elevated temperatures up to a maximum of 1200°F (650°C) and where corrosion is involved, or both. Learn More

Executive Cobalt 12 (MCAW)

ERCCoCr-B Similar in composition to Exocor Cobalt 6 deposits except for a slightly higher carbide content (approx. 16%). The alloy also has a slightly higher hardness coupled with better abrasive and metal-to-metal wear resistance. Learn More

Executive Cobalt 21 (MCAW)

ERCCoCr-E Welds have very good strength and ductility at temperatures up to 1600°F (871°C). Deposits are resistant to thermal shock, and oxidizing and reducing atmospheres. Learn More

Executive Cobalt 1 (SMAW)

ECoCr-C The alloy has a higher carbide content (19%) than those made using either Cobalt 6 or Cobalt 12 electrodes. The composition is such that primary hypereutectic carbides are found in the microstructure. Learn More

Executive Cobalt 6 (SMAW)

ECoCr-A Recommended for cases where wear is accompanied by elevated temperatures up to a maximum of 1200°F (650°C) and where corrosion is involved, or both. Typical applications include automotive and fluid flow valves, chain saw guides, hot punches, shear blades, extruder screws, etc. Learn More

Executive Cobalt 12 (SMAW)

ECoCr-B Similar in composition to Cobalt 6 deposits except for a slightly higher carbide content (approx. 16%). Learn More

Executive Cobalt 21 (SMAW)

ECoCr-E Welds have very good strength and ductility at temperatures up to 1600°F (871°C). Learn More

Certifications

For over twenty-five years Exocor has been a respected name in the industry as a reliable source of filler metals. 
Our corporate office is ISO 9001:2015 certified with memberships in AWS, CWA and GAWDA, and approvals on certain products such as CWB, LLOYDS, and EN.

GawdaAWSCWBISO 9001:2015

Vendor Partners

Our world class partners include:

Special MetalsCor-MetKobelco

Submit an Inquiry

123